Description
W110F Flex Hill Panel
PUROTOUCH®
The W110 Flex is part of our 3D Wall Panels collection. Choose this design where the product is being used vertically, and the moulding is required to wrap around a curved “bar” wall, or into a curved wall recess.
Vertically? If you cut the 2 metre long panel into two and install it above your skirting boards it will create a fabulous wainscotting effect. Trim it top and bottom with our for the perfect finish with our CX190F.
Horizontally? Each 250mm wide panel would make quite a splash around the room.
How many will you need? Simply measure your wall and work out the square metreage. Each complete Valley W109F panel covers exactly half a square metre. When fitting our W110F 3D panels choose one tube of FDP700 adhesive for every 4 panels. Use FX400 joint adhesives where panels meet.
Each W110F 3D panel is 2000 x 250mm and projects by 16mm.
Recommended Adhesives
Choose 1 x FDP700 for every 2 panels purchased. Select 1 x FL300 filler to finish the long lengths joints of up to 5 panels. If you are joining the 250mm wide edges (on walls over 2 metres high) then use FX400 to join up to 20 panels.