Orac W110F Flex Hill Panel

L 200 x H 25 x W 1.6 cm

Choose this flexii design where the product is being used vertically, and the moulding is required to wrap around a curved wall, or into a curved wall recess.

£108.92

Category:

Description

W110F Flex Hill Panel

PUROTOUCH®

The W110 Flex is part of our 3D Wall Panels collection.  Choose this design where the product is being used vertically, and the moulding is required to wrap around a curved “bar” wall, or into a curved wall recess.

Vertically? If you cut the 2 metre long panel into two and install it above your skirting boards it will create a fabulous wainscotting effect. Trim it top and bottom with our  for the perfect finish with our CX190F.

Horizontally? Each 250mm wide panel would make quite a splash around the room.

How many will you need? Simply measure your wall and work out the square metreage. Each complete Valley W109F panel covers exactly half a square metre. When fitting our W110F 3D panels choose one tube of FDP700 adhesive for every 4 panels. Use FX200 joint adhesives where panels meet.

Each W110F 3D panel is 2000 x 250mm and projects by 16mm.

Recommended Adhesives

We recommended the use of FX200, FX210 for butt and mitre joints, and FDP700 Orac adhesives along the length of our profiles to ensure a good installation. On smaller Orac profiles being installed onto dry walls and ceilings (where any new plaster has had at least 6 months to thoroughly dry out) FDP500 can be used to fix mouldings. Please visit the product pages in the Adhesives section for further information.

FX200, FX210, FDP500 and FDP700 Orac Adhesives

Technical Info

TECHNICAL DETAILS

Dimensions: 200 x 1.6 x 25 cm (one W110 covers 0.5 square metres of wall – use 2 x W110 to cover a square metre).

Finish: White Primer (to be finished in a paint of your choice)

Minimum Radius: 40cm

Product Resources

PRODUCT RESOURCES

Product Video

French Paneling with Orac Decor Video

Orac Product Installation PDF

Flexible Moulding Minimum Radius PDF