Orac W110 Hill Panel

L 200 x H 25 x W 1.6 cm

The W110 Hill is part of our 3D Wall Panels collection.




W110 Hill Panel


The W110 Hill is part of our 3D Wall Panels collection. Release your creativity and design a unique work of art that’s a perfect fit for your home. Which way will you fit yours?

Vertically? If you cut the 2 metre long panel into two and install it above your skirting boards it will create a fabulous wainscotting effect. Trim it top and bottom with our CX190 moulding for the perfect finish.

Horizontally? Each 500mm wide panel would make quite a splash around the room. Make sure you use our FX200 glue on every joint.

Diagonally? Why not go one step further by splitting up sections with the CX190 trim to create neat divisions and decorate large areas in matching tones.

Our W110 panel can also be used outside the home. The Purotouch material is stable when applied externally. Ensure you finish each ready primed panel with a suitable exterior grade paint.

How many will you need? Simply measure your wall and work out the square metreage. Each complete valley W110 Hill panel covers exactly one square metre. When fitting our W110 3D panels select one tube of FDP700 adhesive for every 4 panels. Use FX200 joint adhesives where panels meet.

Each W110 3D panel is 2000 x 250mm square and projects by 16mm.

Recommended Adhesives

Choose 1 x FDP700 for every 2 panels purchased. Select 1 x FL300 filler to finish the long lengths joints of up to 5 panels. If you are joining the 250mm wide edges (on walls over 2 metres high) then use FX200 to join up to 20 panels.

FX200, FX210, FL300 and FDP700 Orac Adhesives

Technical Info


Dimensions: 200 x 1.6 x 25 cm (one W110 covers 0.5 square metres of wall – use 2 x W110 to cover a square metre).

Finish: White Primer (to be finished in a paint of your choice)

Product Resources


Product Video

French Paneling with Orac Decor Video

Orac Product Installation PDF