W103 Cubi Element
The Cubi W103 is part of the 3D Wall Panels collection. Release your creativity and design a unique work of art that is a perfect fit for you and your home. To create the most pleasing effects with this panel try to install them with a random pattern by rotating each successive W103 by 90 or 180 degrees. Add a touch more creativity by combining the W103 with our W10 Cubi panel to introduce a pleasing 3D relief pattern.
How would you use the Cubi panel system? Most customers use them in much the same way as a feature wall. Take an area which might potentially have featured a dramatic wallpaper and substitue with Orac 3D panels. Want to spice it up a bit more. Try painting the majority of W103 elements in one colour, pick out a shade from elsewhere in the room (from your soft furnishings?) and paint a few panels in a matching tone.
Want to use the Cubi outside? Why not, just make sure you finish the ready primed W102 with a suitable exterior grade paint.
How many will you need? Simply measure your wall and work out the square metreage. For every square metre of wall simply purchase 9 of our Cubi panels, don’t forget you can mix and match these with the W102 which is exactly the same size.
When fitting Cubi 3D panels make sure you select one tube of FDP700 adhesive for every 9 panels. There’s no need to apply our joint adhesive on this product.
Each W103 and W102 3D panel is 333 x 333mm square and projects by 25mm.
We recommended the use of FX200, FX210 for butt and mitre joints, and FDP700 Orac adhesives along the length of our profiles to ensure a good installation. On smaller Orac profiles being installed onto dry walls and ceilings (where any new plaster has had at least 6 months to thoroughly dry out) FDP500 can be used to fix mouldings. Please visit the product pages in the Adhesives section for further information.