The option to purchase from this website is no longer available. Please contact the office directly for other options. We apologise for any inconvenience.

Orac W100 Rombus Element

15 x 25.8 x 2.9 cm

The W100 can be used to create unique three dimensional friezes for your interior. Position three W100 Rhombus elements together to produce a classic “Box Perspective”.

£20.52

Category:

Description

W100 Rombus Element

PUROTOUCH®

Rombus is part of our 3D Wall Panel collection. The W100 can be used to create unique three dimensional friezes for your interior. Position three W100 Rhombus elements together to produce a classic “Box Perspective”.

Each panel is 258mm (25.8cm) long and 150mm (15cm) wide. Tip to tip the overall length of each element is 300mm (30cm long). Dovetailing three W100 elements together creates an overall shape 346mm high x 300mm wide.

Arrange three W100 elements together into a 3D geometric shape “mini pyramid” with the 18.5mm in the middle, or by rearrange the slope of each to make a 3 part dip into the centre. Perhaps the neatest look is when two elements have the 18.5mm high edge towards the centre, and the third has the thinner 7mm edge in the middle. This combination creates a pleasing three dimensional relief suitable for use on walls or ceilings.

Each W100 is supplied in white primer, ready for you to decorate however you see fit. Why not add a splash of colour? Select on tube of FDP700 to install up to twenty W100 elements. Want to paint the elements different colours? Simply brush or spray on your chosen paint before installing, and squeeze them back to the wall/ceiling once the paint has dried. There is no need to use our FX400 joint adhesive between elements.

As a rough guide we suggest using a minimum of 15 x W100 elements to create an attractive wall frieze which would look proportionate on a wall 600mm wide x 2100mm high.

Recommended Adhesives

We recommended the use of FX400 and FDP700 Orac adhesives along the length of our profiles to ensure a good installation. On smaller Orac profiles being installed onto dry walls and ceilings (where any new plaster has had at least 6 months to thoroughly dry out) FDP500 can be used to fix mouldings, and FL300 can be used as a filler, which is especially useful for smoothing off external corners (once FX400 has cured) and on joints with uneven ceilings. Please visit the product pages in the Adhesives section for further information.

FX400, FL300, FDP500 and FDP700 Orac Adhesives and Fillers

Technical Info

TECHNICAL DETAILS

Dimensions: 15 x 25.8 x 2.9 cm (one complete W100 has a surface area of 0.0264 m2) – Allow for at least 38 x W100 to cover a square metre of wall or ceiling.

Finish: White Primer (to be finished in a paint of your choice)

Installation Details

INSTALLATION DETAILS

3D Wall Covering linear – Orac® Decor Installation Video

3D Wall Covering non-linear – Orac Decor® Installation Video

Painting 3D Wall Covering – Orac Decor® Installation Video

3D Wall Covering with CX190 SX194 – Orac Decor® Installation Video

Power Socket in 3D Wall Covering – Orac Decor® Installation Video

Decofiller Finisher – Orac Decor® Installation Video

Product Video

French Paneling with Orac Decor Video

Orac Product Installation PDF