Orac SX187 High Line Profile

200 x 1.2 x 7.5

This contemporary moulding can be used as either a skirting or slim modern cornice.




SX187 High Line Profile


Designer: Pierre Daems

Building on the success of the Orac Modern Collection the SX187 skirting profile was introduced as part of the Modern 2.0 collection. This contemporary profile can be used as either a skirting or slim modern cornice.

The SX187 profile can be installed with the 75mm profile placed on the wall to create a contemporary skirting board, or with the 12mm height facing the wall and the 75mm on the ceiling to create a simple coving profile. The choice is yours.

Our SX187 High Line skirting works well when combined with our Modern coving profiles in smaller rooms. Typically the SX187 works best with smaller coving profiles such as C356, C360, or C602.

Use SX187 FLEX on curved walls.

Recommended Adhesives

We recommended the use of FX200, FX210 for butt and mitre joints, and FDP700 Orac adhesives along the length of our profiles to ensure a good installation. On smaller Orac profiles being installed onto dry walls and ceilings (where any new plaster has had at least 6 months to thoroughly dry out) FDP500 can be used to fix mouldings. Please visit the product pages in the Adhesives section for further information.

FX200, FX210, FDP500 and FDP700 Orac Adhesives

Recommended Mitre Boxes

FB300, FB13 and FB10 Orac Mitre Boxes

Technical Info


Width: 7.5 cm

Height: 1.2 cm

Length: 200 cm

Finish: White Primer (to be finished in a paint of your choice)

Product Resources


Product Video

French Paneling with Orac Decor Video

Orac Product Installation PDF

Flexible Moulding Minimum Radius PDF