Orac D507 Wall / Door Panel

55 x 90.5 x 1.7 cm

The D507 is a ready-made panel ideally suited for refurbishing doors, walls and bars.

£101.24

Category:

Description

Large Rectangular Door / Wall Panel

DUROPOLYMER®

The D507 is a ready-made panel ideally suited for refurbishing doors, walls and bars where large areas would traditionally be decorated by multiple panel mouldings which have ti be individually trimmed on site.

Using the D507 or any of the sister products will typically reduce installation time by around 80%. Simply apply our FDP700 adhesive to the rear of product and squeeze it to the wall or door! Our D504 and D503 can be used with the D507 to create a three piece door upgrade.

No need for pins or screws, no mitre cuts. Simply apply a top coat of paint once the panel adhesive has dried.

Recommended Adhesives

We recommended the use of FX200, FX210 for butt and mitre joints, and FDP700 Orac adhesives along the length of our profiles to ensure a good installation. On smaller Orac profiles being installed onto dry walls and ceilings (where any new plaster has had at least 6 months to thoroughly dry out) FDP500 can be used to fix mouldings. Please visit the product pages in the Adhesives section for further information.

FX200, FX210, FDP500 and FDP700 Orac Adhesives

Technical Info

TECHNICAL DETAILS

Height: 90.5cm

Width: 55cm

Projection: 1.7cm

Installation Details

INSTALLATION DETAILS

Product Video

French Paneling with Orac Decor Video

Orac Product Installation PDF