Orac CX190 – U Profile
Designer: Orio Tonini
200 x 3 x 2 cm
The primary function being that of an indirect lighting profile. In this instance one of the 20mm high walls would be glued to the wall a short distance from the ceiling. For best results the inner recess requires an aluminium profile to disperse the heat emanating from the LED tape. Once the LED is fitted into the channel and wired to the driver our CX190 will create neat architectural lines of light. When used as an uplighter beneath atriums, or conservatory roofs the best effects will achieved by adding an opal diffuser over the LED tape.
In addition the CX190 can be used as a miniature skirting board, where the U channel is placed against the wall and creates a 30mm high profile which stands 20mm off the wall. The empty channel behind can be used to hide small cables, such as retro-fit broadband wiring or Hi-Fi cables.
The most daring use of CX190 it’s possible to suspend the profile on wires, and create DIRECT lighting channels, offering LED lighting to offices and corridors. Always remember to shield the LED tape with an aluminium bar or reflective tape, which will avoid any unsightly light egress and also promote longer LED life.
An additional function of our CX190 is as a delicate trim to finish off the edges of trimmed W108 Zig Zag wall panelling.
- Width:3 cm
- Height:2 cm
- Length:200 cm
- Finish:White Primer (to be finished in a paint of your choice)