The option to purchase from this website is no longer available. Please contact the office directly for other options. We apologise for any inconvenience.

Orac CX188 Coving Light Profile

200 x 3.4 x 3 cm

This discrete moulding takes advantage of the current trend towards slim LED tape for coving lighting. Our CX188 has been produced in a robust cost effective duropolymer material which can simply be glued to the wall.

Installation Requirement – When using this profile for LED lighting always use an aluminium channel or aluminium tape to mask your LED lighting. Failure to do so may result in light shining through the profile and can reduce the lifespan of LED lighting. Please consult your electrical wholesaler or LED specialist for the relevant materials.

£21.76

Categories: ,

Description

CX188 Coving Light Profile

DUROPOLYMER®

Designer: Orio Tonini

Building on the success of the Orac Modern Collection the CX188 profile was introduced as part of the Modern 2.0 collection.

This discrete moulding takes advantage of the current trend towards slim LED tape for coving lighting. Our CX188 has been produced in a robust cost effective duropolymer material which can simply be glued to the wall.

For best results install an aluminium profile to enhance the light output and disperse the heat emanating from the LED tape. Once the LED is fitted into the channel and wired to the driver the CX188 will create neat architectural light lines. When used as an uplighter beneath atriums, or conservatory roofs the best effects will achieved by adding an opal diffuser over the LED tape.

Choose the CX188 or similar CX189 for rooms with a vaulted ceiling. The profile has been designed to cant the LED tape into the room, and provide optimum light dispersion.

We are also able to offer the CX188 in a flexible format, which enables installation against curved walls. Click CX189F for more detail.

Recommended Adhesives

We recommended the use of FX400 and FDP700 Orac adhesives along the length of our profiles to ensure a good installation. On smaller Orac profiles being installed onto dry walls and ceilings (where any new plaster has had at least 6 months to thoroughly dry out) FDP500 can be used to fix mouldings, and FL300 can be used as a filler, which is especially useful for smoothing off external corners (once FX400 has cured) and on joints with uneven ceilings. Please visit the product pages in the Adhesives section for further information.

FX400, FL300, FDP500 and FDP700 Orac Adhesives and Fillers

Recommended Mitre Boxes

FB300, FB13 and FB10 Orac Mitre Boxes

Technical Info

TECHNICAL DETAILS

Width: 3.4cm

Height: 3cm

Length: 200cm

Finish: White Primer (to be finished in a paint of your choice)

Installation Details

INSTALLATION DETAILS

Product Video

French Paneling with Orac Decor Video

Orac Product Installation PDF