The option to purchase from this website is no longer available. Please contact the office directly for other options. We apologise for any inconvenience.

C396 Largest Steps Coving Uplighter

200 x 6.1 x 18.5

Our largest STEPS lighting coving can also be fitted back to junction of ceilings and walls to make a large ART DECO style cornice. Designers often specify this coving design to create a “coffer detail” where LED lighting can sit towards the centre of a room within a secondary aluminium or PU profile. The C396 coving is very useful where air-con units and wiring trays impede ceiling heights negating the possibility of building up a traditional coffer detail.

£97.26

Categories: ,

Description

C396 Largest Steps Coving and Uplighter

DUROPOLYMER®

Designer: Orio Tonini

Building on the success of the Orac Modern Collection the C396 Steps profile was introduced as part of the Modern 2.0 collection. This contemporary profile can be used as a modern cornice or as a practical solution for hiding a curtain tracks or LED lighting. The chamfered corners at the top and bottom create a subtle line of shadow which accentuates the linear pattern.

The C396 profile can be installed with the 61mm height to hide curtain tracks, or with the 185mm profile placed on the wall to create a discrete uplighter. The choice is yours. By using the C396 as an uplighter in rooms with high ceilings it’s possible to add "volume" to a compact apartment. The simplest way to create this effect is to decorate the walls up to the base of the cornice using a pastel shades, and then decorate the cornice and wall above the same colour as the ceiling (usually white). Whichever way the Orac C396 is installed it should enhance your room.

Recommended Adhesives

We recommended the use of FX400 and FDP700 Orac adhesives along the length of our profiles to ensure a good installation. On smaller Orac profiles being installed onto dry walls and ceilings (where any new plaster has had at least 6 months to thoroughly dry out) FDP500 can be used to fix mouldings, and FL300 can be used as a filler, which is especially useful for smoothing off external corners (once FX400 has cured) and on joints with uneven ceilings. Please visit the product pages in the Adhesives section for further information.

FX400, FL300, FDP500 and FDP700 Orac Adhesives and Fillers

Recommended Mitre Boxes

FB300 and FB10 Orac Mitre Boxes

Technical Info

TECHNICAL DETAILS

Width: 18.5cm

Height: 6.1cm

Length: 200cm

Finish:White Primer (to be finished in a paint of your choice)

Installation Details

INSTALLATION DETAILS

Product Video

French Paneling with Orac Decor Video

Orac Product Installation PDF