C324 Autoire moulding
The C324 Autoire moulding can be used in conjunction with our expanded wall panelling range. The fragmented C324 design is 83mm high by 34mm in projection.
The C324 design can be used in three different ways:
– It can be installed on a wall slightly above head height to create a “Picture Rail” effect. Please note this is a decorative detail which should not be used to hang artworks.
– Use the top edge of the C324 profile directly against the ceiling to create a detail with a triple panel moulding effect.
– Fit the C324 in conjunction with LED lighting to introduce a soft atmospheric mood to your room -either above head height or around niches and shelving.
Choose the C324 on projects where a classic elegance is required. This particular Autoire design will work best when used in conjunction with our other Autoire panel mouldings. Simply mix and match any of these references to create the panelled wall of your dreams.
The complete Autoire collection is listed below.
W120 1.50 x 0.50 metre Rectangular Panel
W121 0.50 x 0.50 metre Square Panel
W122 0.333 x 0.333 metre Disc Panel Insert
W123 0.333 x 0.333 metre Pyramid Panel Insert
C324 2 metre Panel/Coving Moulding
Why not complete the “Autoire Effect” by adding other matching Orac Decor products to your walls? Starting at floor level we recommend the SX137 skirting board or the taller SX138 skirting, P4025 panel moulding or the DX170 architrave.
We recommended the use of FX200, FX210 for butt and mitre joints, and FDP700 Orac adhesives along the length of our profiles to ensure a good installation. On smaller Orac profiles being installed onto dry walls and ceilings (where any new plaster has had at least 6 months to thoroughly dry out) FDP500 can be used to fix mouldings. Please visit the product pages in the Adhesives section for further information.
Recommended Mitre Boxes