The option to purchase from this website is no longer available. Please contact the office directly for other options. We apologise for any inconvenience.

C211F Flexible Coving Moulding

200 x 11.6 x 11.2 cm

Orac C211F has a minimum recommended radius of 2.5 metres. Orac Purotouch Flexible Coving to be used in conjunction with the matching rigid profile.

Always use FDP700 adhesive when fixing these flexible profiles, and be prepared to use “secret fix” pins whilst the adhesives cure. We advise anyone unfamiliar with our products to consider using an Orac approved installer when fitting FLEX references, and ideally learn techniques on rigid profile before tackling heavier and bendy profiles. Always use FX400 joint adhesives where 2 metre lengths abutt. Some installers find it easier to work with an extra pair of hands, and also prep lengths by applying FX400 to joints the day before fitting. In such cases the profiles are laid out flat on a bench, or floor. Even with this prepartion the last joint will need to be done as the profile is installed.

DO NOT ATTEMPT to bend Orac Coving Flex references in an upward or downward arc – these items are designed for use in bay windows, curved hallways and inside circular towers. Try to avoid fitting the profile to a tighter radius than listed here, as the product may buckle and prove impossible to fit.

£132.08

Category:

Description

C211F Flexible Coving Moulding

PUROTOUCH®

A classic cornice with dentil blocks inspired by Georgian / Edwardian styles. Check also C422.

A decorative design, inspired by classical master pieces, adorned with fine details, that can bring back the character of a renovated house or contrasts with modern elements to enrich any setting.

Exists in Flex. Flex profiles are really versatile and the finish is far superior to anything one could ever achieve with timber. Especially with design being pushed to its limits these days; rounded lines, circles and curves galore, you will install those flex to your walls and ceilings without any effort at all!

C211F minimum flex radius is 250cm.

Recommended Adhesives

We recommended the use of FX400 and FDP700 Orac adhesives along the length of our profiles to ensure a good installation. On smaller Orac profiles being installed onto dry walls and ceilings (where any new plaster has had at least 6 months to thoroughly dry out) FDP500 can be used to fix mouldings, and FL300 can be used as a filler, which is especially useful for smoothing off external corners (once FX400 has cured) and on joints with uneven ceilings. Please visit the product pages in the Adhesives section for further information.

FX400, FL300, FDP500 and FDP700 Orac Adhesives and Fillers

Recommended Mitre Boxes

FB300, FB13 and FB10 Orac Mitre Boxes

Technical Info

TECHNICAL DETAILS

Rmin (flex): 2.5 m

Width: 11.2 cm

Height: 11.6 cm

Length: 200 cm

Installation Details

INSTALLATION DETAILS

Product Video

French Paneling with Orac Decor Video

Orac Product Installation PDF

Flexible Moulding Minimum Radius PDF