The option to purchase from this website is no longer available. Please contact the office directly for other options. We apologise for any inconvenience.

Orac C836 Xterio Cornice

200 x 26.6 x 27.1 cm

Choose this profile where the eaves overhang is at least 300mm wide, and allow at least four courses of brickwork above window reveals where a continuous eaves detail is required.

£253.50

Category:

Description

C836 Xterio Cornice

Lightweight Polyurethane

The C836 Xterio cornice is supplied in 2 metre lengths. Each piece is 271mm high x 266mm projection. Our C836 is typically installed on substantial new build detached properties. Choose this profile where the eaves overhang is at least 300mm wide, and allow at least four courses of brickwork above window reveals where a continuous eaves detail is required.

Please be aware that this large moulding will not fit in most mitre boxes. To achieve the best possible installation you may wish to order the C836 pre-cut corner elements. Using this option it is possible to buy either a 2 metre length which has been cut in readiness for use as a 90 degree external or internal corner. Simply order 1 x C836PMCex for every external corner, or 1 x C836PMCin for each internal corner. Alternatively, please ask about our pre-cut lengths for easier on site installation.

Join elements together on site with our FX400 adhesive. Remember to leave the glue to cure for one hour before removing with a spatula. Any remaining residue can be cleaned off with acetone or industrial wipes.

Recommended Adhesives

We recommended the use of FX400 and FDP700 Orac adhesives along the length of our profiles to ensure a good installation. On smaller Orac profiles being installed onto dry walls and ceilings (where any new plaster has had at least 6 months to thoroughly dry out) FDP500 can be used to fix mouldings, and FL300 can be used as a filler, which is especially useful for smoothing off external corners (once FX400 has cured) and on joints with uneven ceilings. Please visit the product pages in the Adhesives section for further information.

FX400, FL300, FDP500 and FDP700 Orac Adhesives and Fillers

Technical Info

TECHNICAL DETAILS

Height: 271cm

Projection: 266cm

Length: 200cm

Finish: White RAL 9003 exterior grade automotive paint finish

Installation Details

INSTALLATION DETAILS

Small Dentil Installation Guide (TF02 / TF03)

Large Dentil Installation Guide (TF01 / TF04 / TF05 / TF06)

Gallows Bracket Installation Guide (GB02, GB03, GB04)

Feature Corbel Installation Guide (FC01)

Rafter Boot Installation Guide (RF01)

Orac Xterio Product Information PDF

Product Video