The option to purchase from this website is no longer available. Please contact the office directly for other options. We apologise for any inconvenience.

C213F Flexible Cornice Moulding

200 x 8 x 8 cm

Orac C213F has a minium recommended radius of 2.8 metres. Orac Purotouch Flexible Coving to be used in conjunction with the matching rigid profile.

Always use FDP700 adhesive when fixing these flexible profiles, and be prepared to use “secret fix” pins whilst the adhesives cure. We advise anyone unfamiliar with our products to consider using an Orac approved installer when fitting FLEX references, and ideally learn techniques on rigid profile before tackling heavier and bendy profiles. Always use FX400 joint adhesives where 2 metre lengths abutt. Some installers find it easier to work with an extra pair of hands, and also prep lengths by applying FX400 to joints the day before fitting. In such cases the profiles are laid out flat on a bench, or floor. Even with this prepartion the last joint will need to be done as the profile is installed.

DO NOT ATTEMPT to bend Orac Coving Flex references in an upward or downward arc – these items are designed for use in bay windows, curved walls and inside circular towers. Try to avoid fitting the profile to a tighter radius than listed here, as the product may buckle and prove impossible to fit.

£91.66

Category:

Description

C213F Flexible Cornice Moulding

PUROTOUCH®

Slightly more stately, but suitable for both country and classic interiors this “Canterbury” model, together with its big brothers C217 and C338, is symmetrical, has a linear pattern on both extremities and is distinguished by its perfect proportions. Pure elegance!

A best-seller which has been very successful for a number of years. Flex profiles are really versatile and the finish is far superior to anything one could ever achieve with timber. Especially with design being pushed to its limits these days; rounded lines, circles and curves galore, you will install those flex to your walls and ceilings without any effort at all!

C213F minimum flex radius is 280cm

Recommended Adhesives

We recommended the use of FX400 and FDP700 Orac adhesives along the length of our profiles to ensure a good installation. On smaller Orac profiles being installed onto dry walls and ceilings (where any new plaster has had at least 6 months to thoroughly dry out) FDP500 can be used to fix mouldings, and FL300 can be used as a filler, which is especially useful for smoothing off external corners (once FX400 has cured) and on joints with uneven ceilings. Please visit the product pages in the Adhesives section for further information.

FX400, FL300, FDP500 and FDP700 Orac Adhesives and Fillers

Recommended Mitre Boxes

FB300, FB13 and FB10 Orac Mitre Boxes

Technical Info

TECHNICAL DETAILS

Rmin (flex): 2.8 m

Width: 8 cm

Height: 8 cm

Length: 200 cm

Installation Details

INSTALLATION DETAILS

Product Video

French Paneling with Orac Decor Video

Orac Product Installation PDF

Flexible Moulding Minimum Radius PDF